Tuesday, February 4, 2014


 You must have excellent PSP working knowledge to follow this tutorial.

Supplies

I used Paint Shop Pro X2 but any version will work.

Tube is Kelly by Spazzd Art you can purchase at The Art Of Spazz.

Scrapkit Kelly by Niqui's Designs you can also purchase at The Art Of Spazz.

Mask 219 you can download at Gems Taggin' Scraps.

Template 2 you can download at Niqui's Designz.

Font of choice

Drop Shadow settings I used on most elements are vertical 3, horizontal 3, Opacity 55, Blur 15, Color Black, you can use whatever settings you are acostumed to.  I drop shadow on elements as I paste them.

Always look at tag for reference.

 Lets Begin


 Open Niqui's template and delete the credits.  Resize to 800x800px.  Go to tube and resize 499x800px.  Copy and paste tube over template as in tag. (You can resize tag later when it's done)

On each template layer you will go to Selections->Select all->Selections->Float->Selections->Defloat, Copy and paste papers then again Selections->Invert->Press delete key.  I always delete the original templates so no dark edges show.

Papers I used:
2 Long Rectangles in the back-Paper 8
Circle-Paper 2
Large Rectangle-Paper 10

For the small rectangles click the center with the magic wand.  Go to tube and Image/Mirror.  Copy and paste to the left side as in tag showing the face.  Go to selections invert and delete.  Do the same with the right side as in tag.  Now go to Manual Color Correction and use these settings for both faces.  Source 235-822, Target 133-208-138.  Now click on the small rectangles layers and go to Adjust/Hue and Saturation/Hue/Saturation/Lightness and use these settings Hue 0, Saturation 0, lightness -100.

 Open element 44.  Resize 600x600px.  Copy and paste.  Drag under tube as in tag.

 Open element 53.  Copy and paste.  Rotate 25 degrees left.  Place it to the right behind tube as in tag.

 Open Element 30.  Do not resize.  Copy and paste.  Drag it all the down as in tag.

 Open element 6.  Resize 230x230px.  Copy and paste.  Place to the right over the guitar.  See tag.

 Open element 50.  Resize 250x250px.  Copy and paste.  Place to the right as in tag.
 
 Open element 39.  Resize 199x200px.  Copy and paste.  Place to the left.

 Open element 11. Resize 174x220px. Copy and paste. Place to the left over the razor ring.

 Open element 25.  Resize 200x200px.  Copy and paste. Place it to the left over the cupcake.

 Open element 3.  Resize 296x300px.  Copy and paste.  Place it to the upper right as in tag.

 Open element 33.   Resize 300x299px.  Copy and paste.  Place it to the right behind the guitar.

 Open element 8.  Resize 750x172px.  Copy and paste. Place it behind the tube and guitar.

 Open element 16.  Resize 704x706px.  Copy and paste.  Drag it all the way down until it's behind all the elements, you can duplicate it and spread around.  See tag.

 Open element 51.  Copy and paste.  Drag all the way until it's behind all the elements.  Merge Visible.

 Open paper 11.  Copy and paste.  Drag it under tag.

 Open mask, go to Layers/New Mask Layer/From Image, Source Luminance checked, Invert data mask unchecked, find mask, OK.  Go to Layers/Merge/Merge Group then Merge Visible.

Tag is done.   Add your name and credits.  If you would like to show me your work contact me at metbrini@gmail.com.  I would love to see what you did.

This tutorial was written by me on Februray 4, 2014. Any similarity to other tutorials is purely coincidental. Do not copy, repoduce, hot link or claim as your own. Do not post on any site or tranlsate without my written consent.


 You must have excellent PSP working knowledge to follow this tutorial.

Supplies

I used Paint Shop Pro X2 but any version will work.

Tube is Marilyn by Spazzd Art I purchased at The Art Of Spazz.

Scrapkit Marilyn by Niqui's Designs you can also purchase at The Art Of Spazz.

Mask 216 you can download at Gems Taggin' Scraps.

Font of choice

Drop Shadow settings I used on most elements are vertical 3, horizontal 3, Opacity 55, Blur 15, Color Black, you can use whatever settings you are acostumed to.  I drop shadow on elements as I paste them.

Always look at tag for reference.

 Lets Begin


 Open a new canvas 750x750(You can resize later)

 Open Tube, Resize 430x620px. Copy and paste onto to canvas.  Place her in the middle.

 Open element 16, copy and paste onto canvas and place it behind tube as in tag.  With the magic wand
   click in center of frame to select it, then go to Selections-Expand 20px.

 Open paper 3, copy and paste onto canvas over the frame.  Go to Selections-Invert and then press delete key.  Now drag the paper under frame.

 Again with the magic wand click the center of frame to select it and again go to Selections-Expand 20px.  Go to the tube, resize it to it's original size click on the tube. Go to Image/Mirror then to Image-Free Rotate and rotate 20 degrees to the right.  Copy and paste it onto tag canvas and place over frame so the face stays in  the middle.  See tag for reference.  Go to Selections-Invert and press delete key and drag the closeup face under frame.  Lower the oppacity to 40.

 Open element 21.  Resize 350x228px.  Copy and paste onto canvas, place to the upper right of frame. 

 Open element 57.  copy and paste onto tag canvas and place it over the bow so that the link stick ups a little.  Now click on the bow layer and go to Selections/Float/Defloat.  Now go to the key layer and erase part of the link on the right side so it looks as if it's wrapped over the bow as in tag.

 Open element 22. Resize 300x194px.  Copy and paste onto tag canvas and place it to the lower left as in tag.

 Open element 60.  Resize 200x152px.  Copy and paste. Place it behind the car as in tag.

 Open element 12.  Resize 111x150px.  Copy and paste.  Place it behind the car a little to the right as in tag.

 Open element 6.   Resize 198x200px.  Copy and paste onto tag canvas and place to the left behind car.  See tag.

 Open element 14.  Go to Image/Mirror.  Copy and paste. Place it behind tube to the right as in tag.

 Open element 47.  Resize 226x300px.  Copy and paste.  Place it as in tag.

 Open element 54.  Resize 150x150px.  Image/Mirror.  Copy and paste.  Place behind tube to the right over the rose.  Go to Layers/Duplicate.  Image/Mirror and place to the left as in tag.  You can resize a bit if you want.

 Open element 23.  Rotate left 90 degrees.  Resize 228x700px.  Copy and paste.  Place to the left behind rose.

 Open element 26.  Image/Mirror and Image/Rotate Left.  Resize 125x400px.  Copy and paste.  Place to the left behind tube.  Go to Layers/Duplicate then Image/Mirror and place it to the left behind car.  See tag.

 Open element 39.  Resize 800x825px.  Copy and paste. Drag it all the way down until it's behind frame.  See tag.

 Open element 58.  Resize 500x500px.  Copy and paste.  Drag it all the way down behind the frame then duplicate it and spread around.  See tag.

 Merge Visible.

 Open paper3.  Copy and paste.  Drag it under tag.

 Open mask, go to Layers/New Mask Layer/From Image, Source Luminance checked,      Invert data mask unchecked, find mask, OK.  Go to Layers/Merge/Merge Group then Merge Visible.


Tag is done.   Add your name and credits.  If you would like to show me your work contact me at metbrini@gmail.com.  I would love to see what you did.



This tutorial was written by me on February 4, 2014.  Any similarity to other tutorials is purely coincidental. Do not copy, repoduce, hot link or claim as your own. Do not post on any site or tranlsate without my written consent.
Saturday, February 1, 2014

 You must have excellent PSP working knowledge to follow this tutorial.

Supplies

I used Paint Shop Pro X2 but any version will work.

Tube from Tezza's Dezignz Tube Art.  I used Dotd Doll 1 from DOTD Dolls you can purchase at Mystical Scraps.

Scrapkit Wicked Attraction by Amy Marie you can purchase at Amy Marie's Kits.

Mask 84 you can download at Weescotslass Creations.

Font of choice

Drop Shadow settings I used on most elements are vertical 3, horizontal 3, Opacity 55, Blur 15, Color Black, you can use whatever settings you are acostumed to.  I drop shadow on elements as I paste them.

Always look at tag for reference.

 Lets Begin

 Open a new canvas 750x750(You can resize later).

 Open Tube, no need to resize this tube, copy and paste onto to canvas.  Place her as in tag.

 Open element 51, copy and paste and drag under tube as in tag.

 Open element 54, copy and paste and drag under tube as in tag.

 Open element 50.  Resize 417x492px.  Copy and paste drag all the way down until it's behind the tombstones. And place to the left.

 Open element 31.  Resize 70x200px.  Copy and paste.  Place behind the skulls to the left as in tag.

 Open element 76.  Resize 131x200px.  Copy and paste.  Place behind the skulls to the right as in tag.

 Open element 56.  Resize 200x193 px. Copy and paste.  Place to the left as in tag.

 Open element 71.  Resize 111x252.  Copy and paste.  Place to the right behind as in tag.

 Open element 45.  Copy and paste and drag all the way under all the elements as in tag.  With the magic wand click inside of frame then go to Selections/Modify/Contract 20px.  Open paper 10.  Copy and paste.  Selections/Invert/Delete.  Drag paper under frame.

 Open element 95.  Copy and paste, place it to the left over frame as in tag.

 Open element 103.  Copy and paste, place it to the left behind the tombstones.  Go to Layers/Duplicate and place the duplicat to the left.  Go back to element 50 then Layers/Duplicate and place it to the right.

 Open element 57.  Copy and paste, drag it all the way under the frame.  Go to Layers/Duplicate and duplicate 3 times, spread it around so it's sticking out of the back of the frame as in tag.

 Open element 104.  Copy and paste.  Drag it all the until is under the skulls to the left as in tag.

 Layer/Merge/Merge Visible.

 Open Paper 1.  Copy and Paste.  Drag under merged tag.
Open mask, go to Layers/New Mask Layer/From Image, Source Luminance checked,  Invert data mask unchecked, find mask, OK.  Go to Layers/Merge/Merge Group then Merge Visible.


Tag is done.   Add your name and credits.  If you would like to show me your work contact me at metbrini@gmail.com.  I would love to see what you did.



This tutorial was written by me on February 1, 2014. Any similarity to other tutorials is purely coincidental. Do not copy, repoduce, hot link or claim as your own. Do not post on any site or tranlsate without my written consent.

My Blinkie

Write Me

Followers