Wednesday, February 29, 2012

You must have very good PSP working knowledge to follow this tutorial.

Supplies
I used Paint Shop Pro X2 but any version will work.
Tube is called Red Poppies by Eugene Rzhevskii you must purchase here PicsForDesign
Kit is a PTU by KC-Exquisite-Dezigns called Sexy in Red you can purchase here KC Exquisite Dezigns
Mask 111 you can download at Designs by Vaybs
I added a flame zip I made for the candle in this kit you can download it here Flame
Font of choice 
Drop Shadow settings I used on most elements are vertical 3, horizontal 3, Opacity 55, Blur 15, Color Black, you can use whatever settings you are acostumed to.  I always add drop shadow afterI copy and paste each elements. 

Always look at tag for reference.

Lets Begin

1.  Open canvas 750x750px you can resize when tag is done.

2.  Open tube, go to image->mirror, copy and paste onto canvas and lower it as in tag.

3.  Open element 25, do not resize copy and paste, drag under tube.

4.  Click on the magic wand and select inside of frame.  Go to selections->modify->expand 45 pixel.

5.  Open paper 1, copy and paste as a new layer, go to selections->invert and delete.  Drag paper under frame.

6.  Select inside of frame again, go back to selections->modify->expand 45 pixel.  Go back to tube, go to image->mirror, then image->free rotate->rotate right 50 degrees.  Copy and paste as a new layer inside selection, then selection->invert->delete.  Deselect and drag tube under frame.  Blend mode Luminance Legacy and lower the oppacity to 34.

7.  Open element 23, resize 368x500px, copy and paste, place on the right side of frame, go to free rotate, rotate right 10 degrees.

8.  Open element 35, resize 300x260px, copy and paste, place on the upper left side of frame.  

9.  Open element 17, resize 183x400px, copy paste, place on the left side of frame and drag under tube.

10.  Open element 19, resize 300x300px, copy and paste, place on the left side above wine bottle.

11.  Open element 33, resize 58x400, copy and paste, place on the left side of frame between rose and bottle.  Open flame, copy and paste, place on candle wick.

12.  Open element 24, resize to 149x150px, copy and paste, place on top of frame, rotate left 15 degrees.  Go back to element 24 and resize again to 119x120px, copy and paste, place on left side of frame, rotate right 15 degrees.

13.  Open element 28, do not resize, copy and paste, drag all the way down until it's behind frame, duplicate it and go to image->mirror, duplicate it again, image->flip, duplicate it one more time, image->mirror and spread around behind frame, see tag.

14.  Open element 29, do not resize, copy and paste, move up until it sticks out of the frame, then drag it all the way down until it's behind all the doodles, duplicate it, go to image->flip and move it around until it's showing from under the tube.

15.  On the layers palette click on the last layer, go to layers->new raster layer->OK and make sure it's all the way down behind all the elements.  Go to the color palette and choose color #8b0000, fill layer.  Open mask and minimize it, go to layers->new mask layer->from image, look for mask in the Source Window, Source Luminance checked, Invert mask data unchecked, OK.  Go to layers->merge->merge group.  Lower the oppacity to 60.

 We are done with the tag.  Add shadow to elements if you haven't already.  Layers->merge->merge visible.  Add your name and credits.  If you would like to show me your work contact me at metbrini@gmail.com.  I would love to see what you did.   

This tutorial was written by me Doris Lynch on February 29, 2012. Any similarity to other tutorials is purely coincidental. Do not copy, repoduce, hot link or claim as your own. Do not post on any site or tranlsate without my written consent.
Sunday, February 26, 2012


You must have very good PSP working knowledge to follow this tutorial.

Supplies
I used Paint Shop Pro X2 but any version will work.
Tube is called Duchess by Zlata_M, St. Patrick's clothes are sold separately and you must purchase here PicsForDesign
Scrapkit is a PTU of mine called Erin Go Bragh you can purchase at Scraps Dimensions
Mask 133 you can download at Designs by Vaybs
Font of choice 
Drop Shadow settings I used on most elements are vertical 3, horizontal 3, Opacity 55, Blur 15, Color Black, you can use whatever settings you are acostumed to 

Always look at tag for reference.

Lets Begin

1.  Open canvas 750x750px you can resize when tag is done.

2.  Open element 24 copy and paste onto canvas.

3.  Open tube, resize copy and paste and place on the right side of frame as in tag.

4.  Go to magic wand and click on the inside of frame.  Go to Selections->modify->expand 5 pixels.  Then
open paper 7 copy and paste as new layer.  Go to Selections->invert then delete.  Drag the paper under frame.

5.  Again go to magic wand and select inside of frame.  Go to Selections->modif->expand 5 pixel.  Go to tube and image->mirror copy and paste tube as new raster layer and place to the left side of the inside frame drag it under frame and lower the oppacity to 34.  Add drop shadow to frame.

6.  Open element 14 resize to 350px.  Copy and paste, place on the left side of frame.

7.  Open element 25 resize to 350px.  Copy and paste, place on the left side of frame behind tube (see tag).

8.  Open element 28 resize to 320x400px.  Copy and paste, place behind cauldron and tube.

9.  Open element 23 resize to 300px.  Copy and paste, place on the upper right side of frame behind tube.

10.  Open element 22 resize to 250px.  Copy and paste, place on the upper right side of frame over element 23 and lower a bit (see tag).

11.  Open element 32 resize to 400px.  Copy and paste, place on the left side of frame behind mouse, rotate left 20 degrees.

12.  Open element 33 resize to 400px.  Copy and paste, place over element 32, rotate right 20 degrees.

13.  Open element 16 resize to 150px.  Copy and paste, place over cauldron on the left side.

14.  Open element 2 resize to 250px.  Copy and paste, rotate left 10 degrees, place under cupcake to the left side.

15.  Open element 41 resize to 700px.  Copy and paste, drag all the way down until it's behind the frame. Duplicate the layer and go to image->mirror. (See tag)

16.  Open element 16 resize to 700px.  Copy and paste, drag down until it's behind the pops and flowers, to image->flip and place on  top of frame then duplicate it and flip and place on the lower part of frame (see tag).

17.  Open element 11 resize to 150px.  Copy and paste, place next to mouse, duplicate it and place above frame, duplicate it again and place on the lower right side.

18.  Open paper 6.  Copy and paste, drag all the way down until it's behind frame and scattered shamrocks.  Open mask, minimize, go to layers->new mask layer->from image, look for mask on the source window, Source Luminance checked, invert mask data unchecked, OK.  Go to layers->merge group.

 We are done with the tag.  Add shadow to elements if you haven't already.  Layers->merge->merge visible.  Add your name and credits.  If you would like to show me your work contact me at metbrini@gmail.com.  I would love to see what you did.   

This tutorial was written by me Doris Lynch on February 26, 2012. Any similarity to other tutorials is purely coincidental. Do not copy, repoduce, hot link or claim as your own. Do not post on any site or tranlsate without my written consent.
Friday, February 24, 2012


You must have very good PSP working knowledge to follow this tutorial.

Supplies
I used Paint Shop Pro X2 but any version will work.
The tube is called Vanessa by Verymany and you must purchase here PicsForDesign
Scrapkit is a PTU called Vanessa you can purchase at Niqui's Designs
Mask 111 you can download at Designs by Vaybs
Font of choice 
Drop Shadow settings I used on most elements are vertical 3, horizontal 3, Opacity 55, Blur 15, Color Black, you can use whatever settings you are acostumed to.  

Always look at tag for reference.

Lets Begin

1.  Open new canvas 750x750.  You can resize later after tag is done.

2.  Open element 21, do not resize, copy and paste on canvas and lower a bit like in tag.

3.  Go to magic wand and click inside each frame.  Go to selections->modify->expand->5 pixels.

4.  Go to tube, resize and click on close up.  Copy and paste close up on right frame.  Go to the tube again and click on close up, go to image->mirror.  Copy and paste on left frame.  Go to selections->invert, delete each close up.  Drag close ups under frames.  Deselect.

5.  Click on frame layer again and go to magic wand, select inside each frame.  Again follow the instructions on 3.  Open paper 21, copy and paste as new layer.  Select->invert, delete, drag paper under close ups and frames.

6.  Click on right close up tube go to adjust->hue and saturation->colorize and use these settings Hue-224 Saturation-189.  Do the same with left close up.  Always look at tag for reference.

7.  Copy and paste full tube and place in the middle between the frames.  Add drop shadow of choice and duplicate it.  Drag the original layer down un frame and keep the copy over it.  Go to the eraser and erase the legs then go the original layer and erase the legs left.  Tube should look like is inside the frames.  See tag.

8.  Open element 61 do not resize.  Copy and paste.  Drag all the way down until is behind frame. Duplicate it 3 times and spread it around like in tag.

9.  Open element 2.  Resize to 450px.  Go to mirror.  Copy and paste, place on the rigth side of frame.

10.  Open element 20.  Do not resize, copy and paste, drag under frame and over splatter.

11.  Open element 40.  Copy and paste, place on the right side over boots.  See tag.

12.  Open element 31.  Resize to 354px.  Copy and paste. place on the lower left side.  See tag.

13.  Open element 32. Copy and paste.  Place on the left side over whip.  Add shadow of your choice. Duplicate it and drag original layer under whip.  Go to the eraser tool. and erase the lower part of handcuffs until it looks like is inside whip.  See tag.

14.  Open element 47.  Image->mirror.  Resize to 200px.  Copy and paste over whip.  See tag.

15.  Open element 13.  With a font of choice not scripted.  Type what's in the tag or anything you choose to type.  Layer->merge->merge visible.  Copy and paste.  Place to the upper left side of frame.  Drag all the way down untill is behind frame.  Rotate it left 20 degrees.

16.  Open element 68.  Resize to 150px.  Place on the upper left side of frame.

17.  Open elements 41 and 42.  Resize them to 250px.  Rotate left 90 degrees and flip them, place them on top of each over boots.  See tag.

18.  Open element 49.  Resize to 300px.  Copy and paste.  Go to image->mirror.  Rotate right 20 degrees place it on the upper right side behind frame.  See tag.

19.  Open paper 20.  copy and paste.  Drag all the way down until it's behind all elements.  Open mask and minimize, go to layers->new mask layer from image.  Look for mask on source window.  Source Luminance checked->invert mask data unchecked->ok.  Layers->merge->merge group.  Lower the oppacity to 65.

We are done with the tag.  Add shadow to elements if you haven't already.  Layers->merge->merge visible.  Add your name and credits.  If you would like to show me your work contact me at metbrini@gmail.com.  I would love to see what you did.   
   
This tutorial was written by me Doris Lynch on February 23, 2012. Any similarity to other tutorials is purely coincidental. Do not copy, repoduce, hot link or claim as your own. Do not post on any site or tranlsate without my written consent.
Friday, February 17, 2012


You must have good PSP working knowledge to follow this tutorial.

Supplies
I used Paint Shop Pro X2 but any version will work.
The tube is called Emilia by Verymany and you must purchase here PicsForDesign
Scrapkit is a PTU called Emilia you can purchase at Niqui's Designs
Mask 219 you can download at Gems Taggin Scraps
Font of choice 
Drop Shadow settings I used on most elements are vertical 3, horizontal 3, Opacity 55, Blur 15, Color Black, you can use whatever settings you are acostumed to.  

Always look at tag for reference.

Lets Begin


 1.  Open Canvas 750x750px.  You can resize after tag is done.

 2.  Copy and paste tube onto canvas.

 3.  Open element 52.  Do not resize.  Copy and paste and drag under tube.  Move tube to your left (see tag).

 4.  With the magic wand select the inside of the frame.  Go to selections->modify->expand-12pixels.
    Open paper 8 copy and paste as a new layer.  Selections->invert->delete drag paper behind frame, deselect.

 5.  Click on the frame layer again and follow the instructions on 4 up to expand and choose the same pixels.  Go to layer new raster layer.  Open tube again and click on close up, copy and paste close up into selection.  Drag close up behind frame.  Do an overlay blend mode and keep the oppacity at 100.

 6.  Click on full tube.  Go to layers->duplicate.  Drag tube under frame and click on the copy layer and  erase the bottom part of tube (see tag) then go down to the original layer and erase what's left.  The tube should look like it's inside the frame.

           Now we will add elements

                    Open element 14...resize it to 350px and place it to your right on the lower part of frame.
                  
                    Open element 50...resize it to 400px and place it to your right behind element 14.
                  
                    Open element 6...resize it to 200px and place it to your right behind element 14.
                  
                     Open element 48...resize it to 300px and place it to your right behind element 14
                    and over the love potion bottle...always see tag for reference.

                    Open element 57...resize it to 350px and place to your upper right side of frame.
                  
                    Open element 15...resize to 400px and place it to your right side behind cocktail glass.

                    Open element 29...resize to 500px...go to image->free rotate and rotate 40 to right.
                    Go to image->mirror...copy and paste...place it behind the dice to the left.
                
                    Open element 40...resize to 250px...copy and paste...place to the left side of element 29
                    and drag behind it.

                    Open element 45...resize to 250px...copy and paste...place it to the left behind mask.

                    Open element 60...do not resize...copy and paste..duplicate it 4 times and place them behind
                    frames like in the tag.
                  
                    Open paper 17...copy and paste...drag all the way down until it's behind all the elements.

                    Open mask...minimize..go to layers->new mask layer->from image..find mask in Source Window->Source Luminance checked->invert data mask unchecked->OK.  Layers->merge->merge group.
        
                      We are done with the tag.  Add shadow to elements if you haven't already.  Layers->merge->merge visible.  Add your name and credits.  If you would like to show me your work contact me at metbrini@gmail.com.  I would love to see what you did.   

This tutorial was written by me on February 17, 2012. Any similarity to other tutorials is purely coincidental. Do not copy, repoduce, hot link or claim as your own. Do not post on any site or tranlsate without my written consent.
Saturday, February 11, 2012

You must have good PSP knowledge to follow this tutorial.

Supplies
I used Paint Shop Pro x2 but any version will work.
The tube is the art of Verymany and you must purchase here PicsForDesign
Scrapkit is a PTU called Margarita  you can purchase at Niqui's Designs
DBV Mask 110 by Vaybs you can download at Designs by Vaybs
Font of choice 
Drop Shadow settings I used on most elements are vertical 3, horizontal 3, Opacity 55, Blur 15, Color Black, you can use whatever settings you are acostumed to.  

Always look at tag for reference.

Lets Begin

 Open canvas 750x750.  You can resize when tag is done.  Open tube, resize, copy and paste onto new canvas.  Place in the middle of canvas. (Always see tag for reference)

  Open element 27.  Copy and paste onto canvas place it to the left over tube
  duplicate it and go to image->mirror and place duplicate to your right side (see tag). Go to layers->merge down  to merge the ribbons.  Duplicate the merged ribbons.  Go to image->flip and place on top behind tube so it looks like a frame. (See tag)
  
   Open element 38 copy and paste, drag behind tube.  (Remember to add shadow to elements) place it a little to your right then duplicate it and go to image->mirror and place duplicate to the left. (See tag) Go to layers->merge down.  Drag down so it is behind the ribbons.

   Open element 1.  Resize to 300px, copy and paste, place to your right side of tube over ribbons.

   Open element 39.  Resize to 450px, copy and paste, place on upper left side and drag so it is behind tube.  Go to image-> free rotate and rotate 15 degrees to the left. (See tag)

   Open element 11.  Resize to 365px, copy and paste, place to your left side over ribbons. (See tag)

   Open element 14.  Resize to 345px, copy and paste, place behind boot and tube, go to image->free rotate and rotate 30 degrees to your left. (See tag)

   Open element 13.  Resize to 210px, copy and paste, place behind boot and ribbons, so it's over the VIP pass. (See tag)

   Open element 4.   Do not resize, copy and paste, place on the upper left side over ribbon. (See tag)

   Open element 30.  Resize to 180px, copy and paste, place over element 4.  Go to image->free rotate and rotate 20 degrees to the left.
 
   Open element 45.  Resize to 300px, copy and paste, place it to your left so it's behind kitty and over element 4.  Go to image->free rotate and rotate 20 degrees to the right.  Duplicate it and go to image->mirror and place over the original a little lower.  (See tag)

   Open paper 12.    Copy and paste on canvas and drag all the way down until it's behind all the elements and tube.  Open DBV Mask 110. Keep mask minimized and go back to tag canvas.  Go to layers->new mask layer->from image-> Source Luminance checked, invert mask data unchecked.  Look for mask on Source Window and click OK.  Go to layers->merge->merge group. 

   Open tube and click on the close up.  Copy and paste and place over the mask to your right side of tube.  Lower the oppacity to 47. (See tag)




  Open element 60.  Copy and paste and place over close up tube. (See tag)

   We are done with the tag.  Add shadow to elements if you haven't already.  Layers->merge->merge visible.  Add your name and credits.  If you would like to show me your work contact me at metbrini@gmail.com.  I would love to see what you did.  
   


This tutorial was written by me on February 11, 2012. Any similarity to other tutorials is purely coincidental. Do not copy, repoduce, hot link or claim as your own. Do not post on any site or tranlsate without my written consent.

My Blinkie

Write Me

Followers