Thursday, September 20, 2012


You must have excellent PSP working knowledge to follow this tutorial.

Supplies
I used Paint Shop Pro X2 but any version will work.
Tube is the art of Alehandra Vanhek you must purchase at PicsForDesign
Scrapkit is a PTU called Halloweenie by Niqui's Designs
Mask 215 you can download at Gems Taggin' Scraps
Font of choice 
Drop Shadow settings I used on most elements are vertical 3, horizontal 3, Opacity 55, Blur 15, Color Black, you can use whatever settings you are acostumed to.  I drop shadow on elements as I paste them.

Always look at tag for reference.

Lets Begin

 1. Open canvas 750x750px.  You can resize later.

2. Open element 44.  Do not resize, copy and paste onto canvas.

3. With the wand select inside of frame and expand 8 pixels.

4. Open tube close up, copy and paste as new layer.  Move around until it looks like in the tag, go to selections/invert and delete.  Deselect. Drag under frame.  Go to Adjust/Hue and Saturation/Colorize/Hue 26 Saturation 211.  Open full tube copy and paste over frame as in tag.

5. Open element 2 resize 420x420px copy and paste, move it to your left side of frame as in tag.

6. Open element 23, copy and paste, and move to your right of frame and drag under it as in tag.

7. Open element 46, resize 150x94px, copy and paste, move to the top of web as in tag.

8. Open element 18, resize 450x428px, copy and paste, duplicate it 2 times, place them next to each other, go to copy(2) of Raster 6, merge down until you merged all three and drag under frame and over the moon as in tag.

9. Open element 25, resize 227x250px, copy, paste and place under tube to your left as in tag.

10. Open element 50, resize 300x260px, copy, paste and place under tube to your lower left as in tag.

11. Open element 8, resize 266x400px, copy, paste and place as in tag.

12. Open element 34, resize 250x91px, copy, paste and place as in tag.

13. Open element 1, resize 128x250px, copy, paste and place as in tag.

14. Open element 37, resize 221x350px, copy, paste and place as in tag.

15. Open element 48, resize 200x182px, copy, paste and place as in tag, duplicate it, image/mirror, place duplicate on your right side as in tag.

16. Open element 17, resize 100x65px, copy, paste and place as in tag.

17. Open element 28, resize 80x200px, copy, paste and place as in tag.

18. Open element 30, resize 500x219px, copy, paste and place as in tag.

19. Open element 35, resize 600x268px, copy, paste place on lower part below tube as in tag, drag all the way down until it's below all layers, duplicate it and flip. (See Tag) Merge Visible.

20. Open paper 2, copy and paste, drag under tag, open mask, go to Layers/New Mask Layer/From Image, Source Luminance checked,  Invert data mask unchecked, find mask, OK.  Go to Layers/Merge/Merge Group then Merge Visible

 Tag is done.   Add your name and credits.  If you would like to show me your work contact me at metbrini@gmail.com.  I would love to see what you did. 

This tutorial was written by me Doris Lynch on September 20, 2012.  Any similarity to other tutorials is purely coincidental.   Do not copy, repoduce, hot link or claim as your own.   Do not post on any site or tranlsate without my written consent.
Tuesday, August 28, 2012


You must have excellent PSP working knowledge to follow this tutorial.

Supplies
I used Paint Shop Pro X2 but any version will work.
Tube is the art of Anna Marine you must purchase at Creative Design Outlet
Scrapkit is a PTU called Dark Gothic you must purchase at Artistic Reality Talent
Mask is mine Mask #11 you can download at Scraps Dimensions
Font of choice 
Drop Shadow settings I used on most elements are vertical 3, horizontal 3, Opacity 55, Blur 15, Color Black, you can use whatever settings you are acostumed to.  Drop shadow on elements as you paste them.

Always look at tag for reference.

Lets Begin

 1. Open canvas 750x750px.  You can resize later.

2. Open tube, paste onto canvas move to your right.

3. Open element 55 do not resize.  Copy and paste onto canvas, move to your left and drag under tube.
   Rotate left 20 degrees.

4. With the magic wand select inside of frame, expand 10 pixels, open paper 2, copy and paste on selection,
   selections/invert, delete.  Drag paper under frame.  Keep selected, open tube close up, copy and paste,
   and delete.

5.  Open element 2, rotate, go to image/rotate right, go to image/mirror, resize 231x600px, go to adjust/hue/saturation/colorize with these settings hue-179 saturation-134, copy and paste, place over frame to your left. (See tag)

6.  Open element 26, image/mirror, resize 450x425px, copy and paste to your right, drag under tube, erase any visible bow. (See tag)

7.  Open element 14, resize 750x171px, copy and paste, drag under tube so that is showing under her legs as in tag.

8.  Open element 56, resize 250x183px, copy and paste, place to your left, rotate 20 degrees.

9.  Open element 43, rotate left, resize 350x220px, copy and paste, place to your left over skull as in tag.

10.  Open element 30, resize 90x175px, copy and paste, place to your left, over rose as in tag.

11.  Open element 20, resize 282x320px, image/mirror, image flip, copy and paste, place to your left under candle as in tag.

12.  Open element 23, resize, 630x650px, copy and paste, drag under frame.

13.  Open element 48, do not resize, copy and paste, drag under frame and glitter.  Drag up that it shows under top of frame, duplicate, flip, image/mirror, drag duplicate down that it shows under lower part of frame. (See tag)

14.  Merge Visible, open paper 7, copy and paste, drag under tag, open my mask, go to Layers/New Mask Layer/From Image, Source Luminance checked,  Invert data mask unchecked, find mask, OK.  Go to Layers/Merge/Merge Group.
 Tag is done.   Add shadow to elements if you haven't already.  Layers->merge->merge visible.  Add your name and credits.  If you would like to show me your work contact me at metbrini@gmail.com.  I would love to see what you did. 


This tutorial was written by me on August 28, 2012. Any similarity to other tutorials is purely coincidental. Do not copy, repoduce, hot link or claim as your own. Do not post on any site or tranlsate without my written consent.
Tuesday, August 14, 2012



You must have excellent PSP working knowledge to follow this tutorial.

Supplies
I used Paint Shop Pro X2 but any version will work.
Tube is called Julia by Alex Prihodko you must purchase at PicsForDesign
Scrapkit is a PTU called Sweet Romance from Niqui's Designs
Mask #110 you can download at Designs by Vayb
Font of choice 
Drop Shadow settings I used on most elements are vertical 3, horizontal 3, Opacity 55, Blur 15, Color Black, you can use whatever settings you are acostumed to.

Always look at tag for reference.

Lets Begin

1.  Open canvas 750x750px. You can resize later.

2.  Open element 20 do not resize, copy and paste onto canvas.

3.  Go to Selection on the toolbar, and select circle, draw out a circle around the clock making sure it doesn't go inside or outside the edges.

4.  Open a new raster layer.  Open paper 11, copy and paste into selection.  Keep selected, copy and paste tube close up and drag under clock, then blend mode Luminance legacy.

5.  Now open tube, copy and paste and place as in tag.

6.  Open element 5 resize 520x487, go to Image/Mirror, copy and paste and place as in tag.  Duplicate it and drag duplicat under clock, click on Eraser tool, erase top layer of element 5 until it looks like it's wrapped inside clock as in image.

                                                                          Elements

                           
                        Element 27, resize 442x500px, rotate right 40 degrees, copy and paste as in tag,
                        duplicate and mirror.           
                   
                       Element 46, resize 300x279px, duplicate it 4 times and place side by side over
                       element 27 as in tag.

                                    Element 47, resize 200x133px, copy and paste, rotate left 20 degrees, and
                                    place to  your left as in tag duplicate it, mirror the duplicate and place to your
                                    lower right over the flowers as in tag.

                                    Element 6, resize 200x200px, copy and paste, place as in tag.

                                    Element 59, resize 163x200px, copy and paste, place as in tag over element 6.

                                    Element 29, resize 300x252px, copy and paste, place to your left as in tag,
                                   drag under cupcake.

 7.  Merge Visible, open a new raster layer and drag under tag, go to color palette material and use color #f6d3ea.  Fill new raster layer.

8.  Open mask, go to Layers/New Mask Layer/From Image, Source Luminance checked, Invert data mask unchecked, find mask, OK.  Go to Layers/Merge/Merge Group.  Merge Visible.

 Tag is done.   Add shadow to elements if you haven't already.  Layers->merge->merge visible.  Add your name and credits.  If you would like to show me your work contact me at metbrini@gmail.com.  I would love to see what you did. 


This tutorial was written by me Doris Lynch on August 14, 2012. Any similarity to other tutorials is purely coincidental. Do not copy, repoduce, hot link or claim as your own. Do not post on any site or tranlsate without my written consent.
Sunday, July 29, 2012


You must have very good PSP working knowledge to follow this tutorial.

Supplies
I used Paint Shop Pro X2 but any version will work.
The tube is called Charming by Verymany and you must purchase here PicsForDesign
Scrapkit is a PTU called Biker you can purchase at Niqui's Designs
Mask 102 is from Laurie Made Me Scraps, her site is no longer open, but I have her permission for you to download here Mask 102
Font of choice 
Drop Shadow settings I used on most elements are vertical 3, horizontal 3, Opacity 55, Blur 15, Color Black, you can use whatever settings you are acostumed to.  

Always look at tag for reference.

Lets Begin

1.  Open tube resize, copy and paste, move a little to your right as in tag.

2.  Open element 1, resize 500x404px.  Copy and paste on canvas drag it under tube as in tag.
    Duplicate it and place the copy over tube.  Erase the part that covers her legs until it
    looks like in the tag.

3.  Open element 44, do not resize.  Copy and paste on canvas and place behind tube and bike as
    in tag.  With the magic wand click inside all squares of the frame.  Go to selections and
    expand 6 pixels.  Open paper 1 copy and paste over selected frame.  Go to selections/invert
    then hit delete.  Drag paper under frame.  Do not deselect.  Go to layers/new raster layer.
    Open tube close up, copy and paste into selection.  Make sure close up is under frame and
    over the paper.  Blend mode Luminance Legacy and lower the oppacity to 50.

4.  Open element 31 resize 200x178px copy and paste on canvas and place it as in tag.

5.  Open element 29 resize 150x112 copy and paste on canvas and place it over element 31 as in tag.

6.  Open element 32 resize 150x150px copy and paste on canvas and place it as in tag.

7.  Open element 40 resize 102x200px copy and paste on canvas and place it as in tag.

8.  Open element 60 do not resize copy and paste, place it to your left as in tag, duplicate it and
    go to image/mirror.

9.  Open element 51 copy and paste on canvas, drag under frame, duplicate it 3 times and place the
    duplicates around as in tag.

10.  Open element 50 copy and paste on canvas drag under frame place it a little to your upper left side,
     duplicate it, go to image/mirror and place to your lower right side as in tag.  Merge visible.

11.  Open paper 5 copy and paste on canvas, place and drag under tag.  Open the mask and go to     Layers-New Mask Layer-From Image, Source Luminance checked, Invert mask data unchecked, look for the mask on the Source Window and click OK.  Go to Layer-Merge-Merge Group.

 Tag is done.   Add shadow to elements if you haven't already.  Layers->merge->merge visible.  Add your name and credits.  If you would like to show me your work contact me at metbrini@gmail.com.  I would love to see what you did. 

This tutorial was written by me on July 29, 2012. Any similarity to other tutorials is purely coincidental. Do not copy, repoduce, hot link or claim as your own. Do not post on any site or tranlsate without my written consent.
Thursday, July 12, 2012
                  

You must have very good PSP working knowledge to follow this tutorial.

Supplies
I used Paint Shop Pro X2 but any version will work.
Tube is called Sofia by Alex Prihodko you must purchase at PicsForDesign
Scrapkit is a PTU called My Beautiful Garden from Niqui's Designs you can purchase at PicsForDesign
Mask #4 by me you can download here Scraps Dimensions
Font of choice 
Drop Shadow settings I used on most elements are vertical 3, horizontal 3, Opacity 55, Blur 15, Color Black, you can use whatever settings you are acostumed to.

Always look at tag for reference.

Lets Begin


1. Open Canvas 750x750px.  You can resize later.

2. Open tube, resize, copy and paste on canvas, place as in tag.

3. Open element 27, resize 600x600px, copy and paste on canvas, place behind tube.

4. Go to magic wand and select inside of frame.  Make sure you select the gaps between the branches.
   Go to Selections-Modify-Expand-16 pixels.  Open paper 3 copy and paste as a new layer. Go to
   Selections-Invert and delete. Keep selected. Drag paper under frame. Go to layer New Raster Layer.
   Open tube close up, copy and paste into selection, deselect and drag close up under frame.  Stay
   on the close up layer, blend mode Burn, and lower the oppacity to 77.

5. Open element 45, resize 550x550px, copy, paste and place behind tube.

6. Open element 60, resize 184x200px, copy, paste and place behind tube and over element 45 as in tag.

7. Open element 1, resize 145x200px, copy, paste and place behind tube to your left.

8. Open element 59, resize 550x125px, copy, paste and place behind tube, drag until it is under tube.(See tag)

9. Open element 40, resize 188x600px, go to Image-Mirror, copy and paste, place behind tube and cat on your right side of canvas.

10. Open element 57, resize 250x500px, copy, paste and place behind, tube and candle to your left, duplicate, mirror place duplicate to your right as in tag.

11. Open element 39, resize 350x183px, copy, paste and place to your upper left corner of frame, go to Image-Free Rotate-left-20 degrees.  Go to Adjust-Hue and Saturation-Colorize Hue 34, Saturation 227.

12. Open element 13, resize 200x159px, Image-Mirror, copy, paste and place on frame as in tag.

13. Open element 47, resize 500x233px, copy, paste and place to your left upper corner of frame so that it's sticking out as in tag, drag element all the way down until it's behind all the elements, duplicate it and scatter it around, see tag for reference.

14. Merge Visible and open paper 10.  Copy, place and drag under tag.  Open my mask and go to Layers-New Mask Layer-From Image, Source Luminance checked, Invert mask data unchecked, look for my mask on the Source Window and click OK.  Go to Layer-Merge-Merge Group.
 
Tag is done.   Add shadow to elements if you haven't already.  Layers->merge->merge visible.  Add your name and credits.  If you would like to show me your work contact me at metbrini@gmail.com.  I would love to see what you did. 
 
This tutorial was written by me Doris Lynch on July 12, 2012 . Any similarity to other tutorials is purely coincidental. Do not copy, repoduce, hot link or claim as your own. Do not post on any site or tranlsate without my written consent.
Saturday, June 9, 2012


You must have very good PSP working knowledge to follow this tutorial.

Supplies
I used Paint Shop Pro X2 but any version will work.
Tube of choice I used Jasmine by Alehandra Vanhek and you must purchase here PicsForDesign
Scrapkit is a PTU called Vamos a la Playa by Niqui's Designs you can purchase at PicsForDesign
Mask 110 you can download at Designs by Vaybs
Font of choice 
Drop Shadow settings I used on most elements are vertical 3, horizontal 3, Opacity 55, Blur 15, Color Black, you can use whatever settings you are acostumed to.  

Elements Used
2, 3, 4, 7, 8, 10, 12, 15, 18, 31, 38, 39, 45, 60
Paper 7 & 2

Always look at tag for reference.

Lets Begin


1.  Open new canvas 750x750px, you can resize later, open tube, resize, copy and paste onto canvas.

2.  Open element 8 resize 700x700px copy and paste onto canvas and place behind tube.  Rotate left 10 degrees.

3.  With magic wand select inside of frame and expand 10px.  Open paper 7 copy and paste as new layer.  Go to  selections-invert, delete and drag paper under frame.  Keep selected.

4.  Go to tube and click on close up, rotate left 10 degrees, copy and paste on canvas, delete and drag under frame, blend mode burn.

5.  Click on full tube layer, duplicate and drag duplicate under frame go to original layer and with eraser tool start erasing around the thighs until tube looks like it's inside frame, then click on copy layer and erase the rest of thighs.

6.  Now take all the elements, resize them and place them as in tag.

7.  When done, merge visible, open paper 2 and mask, copy and paste paper and drap under tag, open mask, go to layer-new mask layer find mask, Source Luminance checked, invert mask data unchecked, OK, layer merge group, tag is done.


This tutorial was written by me Doris Lynch on June 9, 2012. Any similarity to other tutorials is purely coincidental. Do not copy, repoduce, hot link or claim as your own. Do not post on any site or tranlsate without my written consent.
Wednesday, February 29, 2012

You must have very good PSP working knowledge to follow this tutorial.

Supplies
I used Paint Shop Pro X2 but any version will work.
Tube is called Red Poppies by Eugene Rzhevskii you must purchase here PicsForDesign
Kit is a PTU by KC-Exquisite-Dezigns called Sexy in Red you can purchase here KC Exquisite Dezigns
Mask 111 you can download at Designs by Vaybs
I added a flame zip I made for the candle in this kit you can download it here Flame
Font of choice 
Drop Shadow settings I used on most elements are vertical 3, horizontal 3, Opacity 55, Blur 15, Color Black, you can use whatever settings you are acostumed to.  I always add drop shadow afterI copy and paste each elements. 

Always look at tag for reference.

Lets Begin

1.  Open canvas 750x750px you can resize when tag is done.

2.  Open tube, go to image->mirror, copy and paste onto canvas and lower it as in tag.

3.  Open element 25, do not resize copy and paste, drag under tube.

4.  Click on the magic wand and select inside of frame.  Go to selections->modify->expand 45 pixel.

5.  Open paper 1, copy and paste as a new layer, go to selections->invert and delete.  Drag paper under frame.

6.  Select inside of frame again, go back to selections->modify->expand 45 pixel.  Go back to tube, go to image->mirror, then image->free rotate->rotate right 50 degrees.  Copy and paste as a new layer inside selection, then selection->invert->delete.  Deselect and drag tube under frame.  Blend mode Luminance Legacy and lower the oppacity to 34.

7.  Open element 23, resize 368x500px, copy and paste, place on the right side of frame, go to free rotate, rotate right 10 degrees.

8.  Open element 35, resize 300x260px, copy and paste, place on the upper left side of frame.  

9.  Open element 17, resize 183x400px, copy paste, place on the left side of frame and drag under tube.

10.  Open element 19, resize 300x300px, copy and paste, place on the left side above wine bottle.

11.  Open element 33, resize 58x400, copy and paste, place on the left side of frame between rose and bottle.  Open flame, copy and paste, place on candle wick.

12.  Open element 24, resize to 149x150px, copy and paste, place on top of frame, rotate left 15 degrees.  Go back to element 24 and resize again to 119x120px, copy and paste, place on left side of frame, rotate right 15 degrees.

13.  Open element 28, do not resize, copy and paste, drag all the way down until it's behind frame, duplicate it and go to image->mirror, duplicate it again, image->flip, duplicate it one more time, image->mirror and spread around behind frame, see tag.

14.  Open element 29, do not resize, copy and paste, move up until it sticks out of the frame, then drag it all the way down until it's behind all the doodles, duplicate it, go to image->flip and move it around until it's showing from under the tube.

15.  On the layers palette click on the last layer, go to layers->new raster layer->OK and make sure it's all the way down behind all the elements.  Go to the color palette and choose color #8b0000, fill layer.  Open mask and minimize it, go to layers->new mask layer->from image, look for mask in the Source Window, Source Luminance checked, Invert mask data unchecked, OK.  Go to layers->merge->merge group.  Lower the oppacity to 60.

 We are done with the tag.  Add shadow to elements if you haven't already.  Layers->merge->merge visible.  Add your name and credits.  If you would like to show me your work contact me at metbrini@gmail.com.  I would love to see what you did.   

This tutorial was written by me Doris Lynch on February 29, 2012. Any similarity to other tutorials is purely coincidental. Do not copy, repoduce, hot link or claim as your own. Do not post on any site or tranlsate without my written consent.
Sunday, February 26, 2012


You must have very good PSP working knowledge to follow this tutorial.

Supplies
I used Paint Shop Pro X2 but any version will work.
Tube is called Duchess by Zlata_M, St. Patrick's clothes are sold separately and you must purchase here PicsForDesign
Scrapkit is a PTU of mine called Erin Go Bragh you can purchase at Scraps Dimensions
Mask 133 you can download at Designs by Vaybs
Font of choice 
Drop Shadow settings I used on most elements are vertical 3, horizontal 3, Opacity 55, Blur 15, Color Black, you can use whatever settings you are acostumed to 

Always look at tag for reference.

Lets Begin

1.  Open canvas 750x750px you can resize when tag is done.

2.  Open element 24 copy and paste onto canvas.

3.  Open tube, resize copy and paste and place on the right side of frame as in tag.

4.  Go to magic wand and click on the inside of frame.  Go to Selections->modify->expand 5 pixels.  Then
open paper 7 copy and paste as new layer.  Go to Selections->invert then delete.  Drag the paper under frame.

5.  Again go to magic wand and select inside of frame.  Go to Selections->modif->expand 5 pixel.  Go to tube and image->mirror copy and paste tube as new raster layer and place to the left side of the inside frame drag it under frame and lower the oppacity to 34.  Add drop shadow to frame.

6.  Open element 14 resize to 350px.  Copy and paste, place on the left side of frame.

7.  Open element 25 resize to 350px.  Copy and paste, place on the left side of frame behind tube (see tag).

8.  Open element 28 resize to 320x400px.  Copy and paste, place behind cauldron and tube.

9.  Open element 23 resize to 300px.  Copy and paste, place on the upper right side of frame behind tube.

10.  Open element 22 resize to 250px.  Copy and paste, place on the upper right side of frame over element 23 and lower a bit (see tag).

11.  Open element 32 resize to 400px.  Copy and paste, place on the left side of frame behind mouse, rotate left 20 degrees.

12.  Open element 33 resize to 400px.  Copy and paste, place over element 32, rotate right 20 degrees.

13.  Open element 16 resize to 150px.  Copy and paste, place over cauldron on the left side.

14.  Open element 2 resize to 250px.  Copy and paste, rotate left 10 degrees, place under cupcake to the left side.

15.  Open element 41 resize to 700px.  Copy and paste, drag all the way down until it's behind the frame. Duplicate the layer and go to image->mirror. (See tag)

16.  Open element 16 resize to 700px.  Copy and paste, drag down until it's behind the pops and flowers, to image->flip and place on  top of frame then duplicate it and flip and place on the lower part of frame (see tag).

17.  Open element 11 resize to 150px.  Copy and paste, place next to mouse, duplicate it and place above frame, duplicate it again and place on the lower right side.

18.  Open paper 6.  Copy and paste, drag all the way down until it's behind frame and scattered shamrocks.  Open mask, minimize, go to layers->new mask layer->from image, look for mask on the source window, Source Luminance checked, invert mask data unchecked, OK.  Go to layers->merge group.

 We are done with the tag.  Add shadow to elements if you haven't already.  Layers->merge->merge visible.  Add your name and credits.  If you would like to show me your work contact me at metbrini@gmail.com.  I would love to see what you did.   

This tutorial was written by me Doris Lynch on February 26, 2012. Any similarity to other tutorials is purely coincidental. Do not copy, repoduce, hot link or claim as your own. Do not post on any site or tranlsate without my written consent.
Friday, February 24, 2012


You must have very good PSP working knowledge to follow this tutorial.

Supplies
I used Paint Shop Pro X2 but any version will work.
The tube is called Vanessa by Verymany and you must purchase here PicsForDesign
Scrapkit is a PTU called Vanessa you can purchase at Niqui's Designs
Mask 111 you can download at Designs by Vaybs
Font of choice 
Drop Shadow settings I used on most elements are vertical 3, horizontal 3, Opacity 55, Blur 15, Color Black, you can use whatever settings you are acostumed to.  

Always look at tag for reference.

Lets Begin

1.  Open new canvas 750x750.  You can resize later after tag is done.

2.  Open element 21, do not resize, copy and paste on canvas and lower a bit like in tag.

3.  Go to magic wand and click inside each frame.  Go to selections->modify->expand->5 pixels.

4.  Go to tube, resize and click on close up.  Copy and paste close up on right frame.  Go to the tube again and click on close up, go to image->mirror.  Copy and paste on left frame.  Go to selections->invert, delete each close up.  Drag close ups under frames.  Deselect.

5.  Click on frame layer again and go to magic wand, select inside each frame.  Again follow the instructions on 3.  Open paper 21, copy and paste as new layer.  Select->invert, delete, drag paper under close ups and frames.

6.  Click on right close up tube go to adjust->hue and saturation->colorize and use these settings Hue-224 Saturation-189.  Do the same with left close up.  Always look at tag for reference.

7.  Copy and paste full tube and place in the middle between the frames.  Add drop shadow of choice and duplicate it.  Drag the original layer down un frame and keep the copy over it.  Go to the eraser and erase the legs then go the original layer and erase the legs left.  Tube should look like is inside the frames.  See tag.

8.  Open element 61 do not resize.  Copy and paste.  Drag all the way down until is behind frame. Duplicate it 3 times and spread it around like in tag.

9.  Open element 2.  Resize to 450px.  Go to mirror.  Copy and paste, place on the rigth side of frame.

10.  Open element 20.  Do not resize, copy and paste, drag under frame and over splatter.

11.  Open element 40.  Copy and paste, place on the right side over boots.  See tag.

12.  Open element 31.  Resize to 354px.  Copy and paste. place on the lower left side.  See tag.

13.  Open element 32. Copy and paste.  Place on the left side over whip.  Add shadow of your choice. Duplicate it and drag original layer under whip.  Go to the eraser tool. and erase the lower part of handcuffs until it looks like is inside whip.  See tag.

14.  Open element 47.  Image->mirror.  Resize to 200px.  Copy and paste over whip.  See tag.

15.  Open element 13.  With a font of choice not scripted.  Type what's in the tag or anything you choose to type.  Layer->merge->merge visible.  Copy and paste.  Place to the upper left side of frame.  Drag all the way down untill is behind frame.  Rotate it left 20 degrees.

16.  Open element 68.  Resize to 150px.  Place on the upper left side of frame.

17.  Open elements 41 and 42.  Resize them to 250px.  Rotate left 90 degrees and flip them, place them on top of each over boots.  See tag.

18.  Open element 49.  Resize to 300px.  Copy and paste.  Go to image->mirror.  Rotate right 20 degrees place it on the upper right side behind frame.  See tag.

19.  Open paper 20.  copy and paste.  Drag all the way down until it's behind all elements.  Open mask and minimize, go to layers->new mask layer from image.  Look for mask on source window.  Source Luminance checked->invert mask data unchecked->ok.  Layers->merge->merge group.  Lower the oppacity to 65.

We are done with the tag.  Add shadow to elements if you haven't already.  Layers->merge->merge visible.  Add your name and credits.  If you would like to show me your work contact me at metbrini@gmail.com.  I would love to see what you did.   
   
This tutorial was written by me Doris Lynch on February 23, 2012. Any similarity to other tutorials is purely coincidental. Do not copy, repoduce, hot link or claim as your own. Do not post on any site or tranlsate without my written consent.
Friday, February 17, 2012


You must have good PSP working knowledge to follow this tutorial.

Supplies
I used Paint Shop Pro X2 but any version will work.
The tube is called Emilia by Verymany and you must purchase here PicsForDesign
Scrapkit is a PTU called Emilia you can purchase at Niqui's Designs
Mask 219 you can download at Gems Taggin Scraps
Font of choice 
Drop Shadow settings I used on most elements are vertical 3, horizontal 3, Opacity 55, Blur 15, Color Black, you can use whatever settings you are acostumed to.  

Always look at tag for reference.

Lets Begin


 1.  Open Canvas 750x750px.  You can resize after tag is done.

 2.  Copy and paste tube onto canvas.

 3.  Open element 52.  Do not resize.  Copy and paste and drag under tube.  Move tube to your left (see tag).

 4.  With the magic wand select the inside of the frame.  Go to selections->modify->expand-12pixels.
    Open paper 8 copy and paste as a new layer.  Selections->invert->delete drag paper behind frame, deselect.

 5.  Click on the frame layer again and follow the instructions on 4 up to expand and choose the same pixels.  Go to layer new raster layer.  Open tube again and click on close up, copy and paste close up into selection.  Drag close up behind frame.  Do an overlay blend mode and keep the oppacity at 100.

 6.  Click on full tube.  Go to layers->duplicate.  Drag tube under frame and click on the copy layer and  erase the bottom part of tube (see tag) then go down to the original layer and erase what's left.  The tube should look like it's inside the frame.

           Now we will add elements

                    Open element 14...resize it to 350px and place it to your right on the lower part of frame.
                  
                    Open element 50...resize it to 400px and place it to your right behind element 14.
                  
                    Open element 6...resize it to 200px and place it to your right behind element 14.
                  
                     Open element 48...resize it to 300px and place it to your right behind element 14
                    and over the love potion bottle...always see tag for reference.

                    Open element 57...resize it to 350px and place to your upper right side of frame.
                  
                    Open element 15...resize to 400px and place it to your right side behind cocktail glass.

                    Open element 29...resize to 500px...go to image->free rotate and rotate 40 to right.
                    Go to image->mirror...copy and paste...place it behind the dice to the left.
                
                    Open element 40...resize to 250px...copy and paste...place to the left side of element 29
                    and drag behind it.

                    Open element 45...resize to 250px...copy and paste...place it to the left behind mask.

                    Open element 60...do not resize...copy and paste..duplicate it 4 times and place them behind
                    frames like in the tag.
                  
                    Open paper 17...copy and paste...drag all the way down until it's behind all the elements.

                    Open mask...minimize..go to layers->new mask layer->from image..find mask in Source Window->Source Luminance checked->invert data mask unchecked->OK.  Layers->merge->merge group.
        
                      We are done with the tag.  Add shadow to elements if you haven't already.  Layers->merge->merge visible.  Add your name and credits.  If you would like to show me your work contact me at metbrini@gmail.com.  I would love to see what you did.   

This tutorial was written by me on February 17, 2012. Any similarity to other tutorials is purely coincidental. Do not copy, repoduce, hot link or claim as your own. Do not post on any site or tranlsate without my written consent.
Saturday, February 11, 2012

You must have good PSP knowledge to follow this tutorial.

Supplies
I used Paint Shop Pro x2 but any version will work.
The tube is the art of Verymany and you must purchase here PicsForDesign
Scrapkit is a PTU called Margarita  you can purchase at Niqui's Designs
DBV Mask 110 by Vaybs you can download at Designs by Vaybs
Font of choice 
Drop Shadow settings I used on most elements are vertical 3, horizontal 3, Opacity 55, Blur 15, Color Black, you can use whatever settings you are acostumed to.  

Always look at tag for reference.

Lets Begin

 Open canvas 750x750.  You can resize when tag is done.  Open tube, resize, copy and paste onto new canvas.  Place in the middle of canvas. (Always see tag for reference)

  Open element 27.  Copy and paste onto canvas place it to the left over tube
  duplicate it and go to image->mirror and place duplicate to your right side (see tag). Go to layers->merge down  to merge the ribbons.  Duplicate the merged ribbons.  Go to image->flip and place on top behind tube so it looks like a frame. (See tag)
  
   Open element 38 copy and paste, drag behind tube.  (Remember to add shadow to elements) place it a little to your right then duplicate it and go to image->mirror and place duplicate to the left. (See tag) Go to layers->merge down.  Drag down so it is behind the ribbons.

   Open element 1.  Resize to 300px, copy and paste, place to your right side of tube over ribbons.

   Open element 39.  Resize to 450px, copy and paste, place on upper left side and drag so it is behind tube.  Go to image-> free rotate and rotate 15 degrees to the left. (See tag)

   Open element 11.  Resize to 365px, copy and paste, place to your left side over ribbons. (See tag)

   Open element 14.  Resize to 345px, copy and paste, place behind boot and tube, go to image->free rotate and rotate 30 degrees to your left. (See tag)

   Open element 13.  Resize to 210px, copy and paste, place behind boot and ribbons, so it's over the VIP pass. (See tag)

   Open element 4.   Do not resize, copy and paste, place on the upper left side over ribbon. (See tag)

   Open element 30.  Resize to 180px, copy and paste, place over element 4.  Go to image->free rotate and rotate 20 degrees to the left.
 
   Open element 45.  Resize to 300px, copy and paste, place it to your left so it's behind kitty and over element 4.  Go to image->free rotate and rotate 20 degrees to the right.  Duplicate it and go to image->mirror and place over the original a little lower.  (See tag)

   Open paper 12.    Copy and paste on canvas and drag all the way down until it's behind all the elements and tube.  Open DBV Mask 110. Keep mask minimized and go back to tag canvas.  Go to layers->new mask layer->from image-> Source Luminance checked, invert mask data unchecked.  Look for mask on Source Window and click OK.  Go to layers->merge->merge group. 

   Open tube and click on the close up.  Copy and paste and place over the mask to your right side of tube.  Lower the oppacity to 47. (See tag)




  Open element 60.  Copy and paste and place over close up tube. (See tag)

   We are done with the tag.  Add shadow to elements if you haven't already.  Layers->merge->merge visible.  Add your name and credits.  If you would like to show me your work contact me at metbrini@gmail.com.  I would love to see what you did.  
   


This tutorial was written by me on February 11, 2012. Any similarity to other tutorials is purely coincidental. Do not copy, repoduce, hot link or claim as your own. Do not post on any site or tranlsate without my written consent.

My Blinkie

Write Me

Followers